Washer Leaking — What Causes It and Which Parts Fix the Problem
Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.
Understanding the Problem
A leaking washing machine is one of the most common appliance problems. Leaks can come from hoses, clamps, the water inlet valve, the drain pump, the door seal (front-load machines), or a cracked tub. Water may appear during fill, agitation, drain or sit under the machine after a cycle. Finding the leak source is the key to an effective repair. Some leaks are simple — a loose hose clamp or worn rubber hose — while others are more involved, like a failed pump seal or a torn door boot. Repair cost and difficulty vary by the fault and by model, but many leaks can be accurately diagnosed with a careful run-and-inspect approach and a few basic tools.
Common Symptoms
Visible water under or around the washer; puddles after cycles; water on the floor near the washer door or behind machine; unusual noises with leaking (slosh/gurgle).
Common Causes
- Loose or cracked inlet/fill hoses or hose clamps
- Worn, torn, or misaligned door boot (front-load machines)
- Faulty or clogged drain pump or worn pump seal
- Cracked outer or inner tub
- Faulty water inlet valve or leaking valve connections
Popular Parts That Fix This Problem
These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at ProsourceParts.com — just search by your appliance model number for a guaranteed fit.
Helpful Repair Tip
Run a short wash cycle with a towel under the machine and watch closely: note whether the leak starts during fill, agitation, spin, or drain. That timing pinpoints hoses/inlet (fill), tub/pump (drain/spin), or door boot (throughout cycle).
Frequently Asked Questions
How do I find exactly where my washer is leaking from?
Run a short cycle while watching the machine closely or use towels to catch water and identify the area of origin. Note when the leak occurs (fill, agitate, spin, or drain) — timing points to inlet hoses/valve (fill), tub/door boot (during agitation or throughout), or drain pump/drain hose (drain/spin). Pull the washer out, dry it, and run again so you can see whether water comes from the front, back, bottom, or under the tub.
Can I keep using my washer if it leaks a little?
You should not use a leaking washer routinely. Even small leaks can cause water damage to floors and cabinets and can lead to electrical hazards or mold. Turn off the water and power, and inspect the machine. If the leak is minor and from a hose or clamp you can replace quickly, that may be a short-term fix — otherwise call a technician to diagnose and repair the root cause.
Related How-To Videos
Real DIY Repair Stories
Be the first to share your repair story!
Share Your Repair Story
Your experience helps other homeowners fix their appliances. Tell us how it went!
Can't Fix It Yourself? Find a Local Technician
It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.
Find the Right Part for Your Appliance
Don't guess — search your exact appliance model number at ProsourceParts.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.
Your Free Parts Videos
Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to ProsourceParts.com where you can search by model number and get the right part shipped fast.