W10376397 — What This Part Is and How to Diagnose & Replace It

Understanding the Problem

Short explanation: I can't reliably map W10376397 to a single, unique component without the appliance brand and model. Part numbers can be reused or listed differently across Whirlpool/Maytag/Amana/Kenmore parts databases. Below are practical, step-by-step diagnostic and repair instructions you can use right away to identify the part on your machine and replace it safely once identified. 1) Confirm brand and model: Locate the appliance's model and serial tag (usually on the door frame, inside the door, behind the kickplate, or on the back). Write down brand and full model number — this lets you cross-reference W10376397 precisely. 2) Photograph the existing part and mounting location: Before removing anything, take clear photos of the part, labels, connectors, and the surrounding area. That will help confirm matches with online listings or parts suppliers. 3) Cross-reference the part: Use the appliance model + W10376397 at the manufacturer parts lookup (Whirlpool/Maytag parts site) or a reputable parts seller (RepairClinic, PartSelect, AppliancePartsPros). Confirm the part name, function, and exploded-view diagram that shows its location in your model. 4) Diagnose symptoms to confirm the part is the cause: Use the 'common symptoms' (below) and any model-specific error codes. For electrical parts, use a multimeter to check continuity, resistance, or voltage per the manufacturer's service manual. For mechanical parts, check for wear, cracks, binding, or broken mounts. 5) Order the correct replacement: Once you confirm the exact match (pictures, part index #, diagram), order an OEM or exact-fit replacement. Avoid substitutes unless parts diagrams show interchangeability. 6) Practical replacement steps (generic, apply to most internal parts): a) Unplug the appliance or switch off the circuit breaker. For gas appliances, turn off the gas supply. b) Move the appliance away from the wall and remove any panels blocking access (back panel, top, or front panel) using appropriate screwdrivers or nut drivers. c) Label and photograph wiring harnesses and connectors before disconnecting. Use masking tape and a pen to mark connector positions. d) Remove fasteners holding the faulty part, gently detach connectors and any linkage. Keep screws/fasteners organized. e) Install the new W10376397 part in the reverse order: secure mounting fasteners, reconnect wiring harnesses, and reassemble panels. f) Restore power and run a test cycle or operation to verify the repair. Check for leaks, unusual noise, or error codes. Safety note: Always disconnect electrical power (and gas if applicable) before working on appliances. If you are not comfortable working with high-voltage components, gas connections, or complex controls, hire a licensed appliance technician.

Common Symptoms

Symptoms depend on the actual component matched to W10376397, but commonly: appliance won't start, intermittent operation, specific error codes, part physically damaged or loose, or mechanical binding/noise in the area where the part mounts.

Common Causes

• Normal wear and mechanical stress over time (bearings, springs, seals, plastic tabs breaking)
• Electrical failure from power surges, moisture, or burned connectors (for switches, boards, motors)
• Improper installation or physical damage from impacts or shipping

Popular Parts That Fix This Problem

These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at ProsourceParts.com — just search by your appliance model number for a guaranteed fit.

Frequently Asked Questions