For educational purposes only. Always consult a certified technician when unsure.

Samsung WV60A9900AV Won't Drain or Spin – What Part Fixes This Problem?

Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.

Understanding the Problem

If your Samsung WV60A9900AV washer stops draining and/or won’t spin, the result is soggy loads, error codes, and a washer that won’t finish the cycle. This symptom typically points to a drainage, locking, or motor-control issue. Modern Samsung front‑load washers use electronic controls, a drain pump, and a door interlock — failure of any of these can prevent draining or spinning. Begin by confirming whether the machine shows an error code (check the display and the owner’s manual for code meanings). Many failures are mechanical (clogged pump or kinked hose) and easy to fix; others are electrical (failed drain pump motor, door lock, or main/inverter control board) and require parts replacement. Proper diagnosis saves time and cost: start with the simplest checks and work toward replacing components only when confirmed faulty.

Common Symptoms

Washer stops mid‑cycle with water in the drum, spins won’t start, error codes (e.g., dE/UE/LE/HE/5C/SE), unusual noises from the base, or visible leakage/kinked drain hose.

Common Causes

  • Clogged or blocked drain pump or drain hose (debris, lint, small garments)
  • Failed drain pump motor (won’t run/hums/clicks) or worn impeller
  • Faulty door lock/interlock or main/inverter control board preventing spin cycle

Popular Parts That Fix This Problem

These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at ProsourceParts.com — just search by your appliance model number for a guaranteed fit.

DC97-17335A (common Samsung drain pump)Drain Pump Assembly (OEM)
DC64-00529A / DC64-02083A (common Samsung door latch numbers)Door Lock / Interlock Assembly
DC92-01655B / DA92-01016A (common Samsung main board refs)Main Control Board (PCB)
DD92-00116A / DD95-00203A (common Samsung inverter board refs)Inverter / Motor Drive Board
Genuine OEM hose (replace if kinked or cracked) — check part listing for WV60A9900AVDrain Hose (OEM)
Model‑specific bearing/seal kit — check fit for WV60A9900AVBearing & Seal Kit (if drum seized/noise)
Pro tip incoming! 🧠

Helpful Repair Tip

Run a drain/spin or pump‑out cycle and listen at the bottom front of the washer — a working pump emits a steady whir or hum; a loud grinding, intermittent hum, or silence with water left behind points to a faulty drain pump. Also check the door lock: if the machine never locks, it won’t start the spin.

Frequently Asked Questions

How much does it usually cost to replace the drain pump on this model?

Parts for a Samsung drain pump typically range from $40–$120 depending on supplier and OEM vs aftermarket. Labor (if you hire a technician) is commonly $100–$200 depending on region. Total cost is usually $150–$320. If the problem is a control board or motor/inverter, parts and labor will be higher.

Can I repair this myself or should I call a technician?

Basic checks and fixes (clearing a clogged drain hose, cleaning the pump filter, inspecting the door latch) are DIY‑friendly if you’re comfortable unplugging the washer and accessing the lower front panel. Replacing the drain pump or door lock is a moderate DIY job with common tools. Replacing the main control or inverter board, diagnosing motor faults, or doing bearing replacement is more advanced and may be best handled by a trained technician. Always unplug the appliance and turn off water before starting repairs, and consult a model‑specific service manual or parts diagram for WV60A9900AV.

Real stories from real fixers!

Real DIY Repair Stories

Be the first to share your repair story!

Share Your Repair Story

Your experience helps other homeowners fix their appliances. Tell us how it went!

Minimum 10 characters.

No shame in calling a pro! 🛠️

Can't Fix It Yourself? Find a Local Technician

It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.

You got this! Find your part! 💪

Find the Right Part for Your Appliance

Don't guess — search your exact appliance model number at ProsourceParts.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.

Your Free Parts Videos

Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to ProsourceParts.com where you can search by model number and get the right part shipped fast.