Hey there! The info here is for educational purposes only — every appliance is different, so your experience may vary.

When in doubt, always reach out to a certified repair technician to stay safe!

Samsung DV45H7000GW/A2 Replacement Guide – Which Parts to Replace and How

Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.

Understanding the Problem

This guide covers the most common replacement parts and fault symptoms for the Samsung DV45H7000GW/A2 dryer. Owners commonly need replacements when the dryer overheats or doesn't heat, the drum won't tumble, the dryer is unusually noisy, or electronic controls behave erratically. Before ordering parts, always verify your exact model and serial number from the sticker on the dryer (usually inside the door or on the rear) — similar model numbers can use different parts. Most dryer faults fall into a few categories: electrical/control failures, mechanical/tumbling failures, air flow/heating problems, and sensors/thermostats. Use basic visual checks (damaged wires, burned connectors, worn belt), simple continuity tests with a multimeter, and targeted inspections (check drum rollers and idler) to confirm which part needs replacement. If you're unsure, take photos of the control board and connectors, or contact a qualified technician — incorrect parts or installation can create safety hazards.

Common Symptoms

No heat, intermittent heat, won't tumble, loud squealing or thumping, dryer starts but stops mid-cycle, error codes on display.

Common Causes

  • Blown thermal fuse, faulty high-limit thermostat, or bad heating element causing no heat
  • Broken or stretched drum belt, seized drum roller, or failed idler pulley causing no tumbling
  • Worn motor bearings, failing drum rollers, or damaged blower wheel causing loud noise

Popular Parts That Fix This Problem

These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at PartsDiscount.com — just search by your appliance model number for a guaranteed fit.

Varies by production run — confirm exact Samsung part number on dryer label or supplier (commonly liThermal fuse (high-limit/overheat safety)
Varies — check OEM part with model and serial; many suppliers list a heating/element assembly for DVHeating element assembly (for electric models)
Varies — size and tooth count depend on model; confirm with DV45H7000GW/A2 before orderingDrum belt
Varies — replace rollers in matched kits specific to the modelDrum roller(s) / roller kit
Varies — model-specific idler pulley assembly (confirm fit for DV45H7000GW/A2)Idler pulley (tensioner)
Varies — check OEM blower wheel that matches the DV45H7000 seriesBlower wheel (fan)
Varies — door latch assemblies differ by model revision; verify part for A2 revisionDoor latch / door switch assembly
Varies — control board part numbers are specific to model and revision; verify serial/model before oControl board / main PCB
Varies — temperature sensor is model-specific; test before replacingThermistor / temperature sensor
Pro tip incoming! 🧠

Helpful Repair Tip

Start by unplugging the dryer, removing the front panel or lint filter assembly, and doing a continuity check with a multimeter on the thermal fuse and heating element. A broken belt is obvious on a visual inspection — if the drum spins freely by hand with the motor running, the belt is likely broken.

Frequently Asked Questions

How do I find the exact replacement part number for my DV45H7000GW/A2?

Locate the model and serial sticker on the dryer (often inside the door opening, on the door frame, or on the rear). Use that full model/serial when searching parts on Samsung's parts website or at reputable appliance parts retailers. If unsure, take a clear photo of the sticker and the part you need and send it to the parts supplier to confirm fit.

Can I replace these parts myself and what safety precautions should I take?

Many replacements (belt, rollers, idler, blower wheel, thermal fuse) are DIY-friendly if you have basic tools and follow safety steps: unplug the dryer, turn off power at the breaker, wear gloves, and keep track of fasteners and wiring connectors. Use a multimeter to confirm electrical faults before replacing components. For control board work or gas-related repairs, or if you're uncomfortable with diagnostics, hire a licensed technician — incorrect repairs can be hazardous.

Real stories from real fixers!

Real DIY Repair Stories

Be the first to share your repair story!

Share Your Repair Story

Your experience helps other homeowners fix their appliances. Tell us how it went!

Minimum 10 characters.

No shame in calling a pro! 🛠️

Can't Fix It Yourself? Find a Local Technician

It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.

You got this! Find your part! 💪

Find the Right Part for Your Appliance

Don't guess — search your exact appliance model number at PartsDiscount.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.

Your Free Parts Videos

Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to PartsDiscount.com where you can search by model number and get the right part shipped fast.

🔔 🔔 Sign Up for the Next Video Drop! Plus Coupon Codes. Tips & More!

Join our free email list. Be the first to know about new repair videos, exclusive coupon codes, and handy tips!