Hey there! The info here is for educational purposes only — every appliance is different, so your experience may vary.

When in doubt, always reach out to a certified repair technician to stay safe!

Samsung DV45H7000GW/A2 Replacement – Parts & How to Diagnose What Needs Replacing

Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.

Understanding the Problem

The Samsung DV45H7000GW/A2 is a common front-load electric dryer that can develop a few recurring faults as it ages. Most service calls for this model involve failures of the heating element/thermal fuse (dryer won’t heat), worn drum belt or motor issues (drum won’t tumble), noisy operation from worn rollers or blower wheel, or electronic/sensor faults that cause error codes or long drying times. Diagnosing which part to replace usually starts with the symptom and a few basic checks: inspect the vent and lint trap for airflow restrictions, listen for abnormal noises during spin, and run the dryer’s diagnostic cycle or check error codes. Electrical components like the heating element, thermal fuse, thermostats and thermistors are straightforward to test for continuity with a multimeter. Mechanical parts such as belts, rollers and blower wheels require a visual inspection and sometimes partial disassembly to confirm wear or damage.

Common Symptoms

No heat or low heat; long cycle times; dryer runs but drum doesn’t turn; loud rumbling or squealing noises; error codes on the display; dryer won’t start or stops mid-cycle.

Common Causes

  • Failed heating element, thermal fuse or high-limit thermostat causing no heat
  • Worn/broken drum belt, seized drum rollers or motor failure preventing tumble
  • Restricted venting or clogged lint trap causing overheating and poor drying performance

Popular Parts That Fix This Problem

These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at PartsDiscount.com — just search by your appliance model number for a guaranteed fit.

DC97-17341A (common for many Samsung electric dryers; verify for DV45H7000GW/A2)Heating element assembly (heater)
DC47-00016A (common thermal fuse; actual number may vary — check model label)Thermal fuse / thermal cutoff
DC66-00494A (common belt; confirm length and ribs for this model)Drum belt
DC93-00417A (common roller part used on many Samsung dryers)Drum rollers (set)
DC93-00633A (common idler assembly; verify fit)Idler pulley / tensioner
DC31-00027A / DC31-00033A (motor part numbers vary by submodel — confirm)Drive motor (dryer motor)
DC97-08007A (common blower wheel; check shape and mounting)Blower wheel / fan
DC47-00008A (thermostat/thermal cutoff variants exist — verify exact type)High-limit thermostat / temperature sensor
DC32-00018A (common thermistor; confirm connector type)Temperature thermistor / sensor
DC34-00035A (moisture sensor assemblies vary — inspect your sensor length)Moisture sensor bars
DC64-00627A (door switch may have alternate numbers — check connector)Door switch / interlock
DC92-01633A (control board numbers vary by production run — match main board label)Main control board (PCB)
DC97-11132A (common lint screen; confirm trim/style)Lint filter / mesh screen
Pro tip incoming! 🧠

Helpful Repair Tip

Before buying parts, run the dryer’s built-in diagnostic mode and check error codes, and use a multimeter to test continuity on the heating element, thermal fuse and motor. Also verify proper vent airflow — many ‘no heat’ or long-dry problems are vent-related, not component failure.

Frequently Asked Questions

Can I replace parts on my DV45H7000GW/A2 myself?

Yes — many parts (belt, rollers, blower wheel, heating element, sensors) can be replaced by a competent DIYer with basic tools and a multimeter. Always unplug the dryer and turn off power at the breaker before servicing. Follow step-by-step guides or manufacturer service manuals for disassembly. If you’re uncomfortable with electrical work or control-board diagnosis, hire a qualified technician.

How do I make sure I order the correct replacement part?

Use the dryer’s model and serial number from the label (usually inside the door or on the back) when searching for parts. Cross-check replacement part numbers with the part label and images, and where possible download the DV45H7000GW/A2 parts diagram (exploded view) from Samsung or a trusted parts supplier. If a part number looks different, contact the supplier with your model/serial to confirm compatibility.

Real stories from real fixers!

Real DIY Repair Stories

Be the first to share your repair story!

Share Your Repair Story

Your experience helps other homeowners fix their appliances. Tell us how it went!

Minimum 10 characters.

No shame in calling a pro! 🛠️

Can't Fix It Yourself? Find a Local Technician

It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.

You got this! Find your part! 💪

Find the Right Part for Your Appliance

Don't guess — search your exact appliance model number at PartsDiscount.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.

Your Free Parts Videos

Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to PartsDiscount.com where you can search by model number and get the right part shipped fast.

🔔 🔔 Sign Up for the Next Video Drop! Plus Coupon Codes. Tips & More!

Join our free email list. Be the first to know about new repair videos, exclusive coupon codes, and handy tips!