Samsung DV400EWHDWR Dryer Not Heating – What Part Fixes This Problem?
Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.
Understanding the Problem
If your Samsung DV400EWHDWR/AA-00 tumbles normally but clothes stay damp or drying times are very long, the problem is almost always a heating-related failure. Electric dryers create heat with a heating element assembly controlled by thermostats/thermistor(s) and protected by a thermal fuse/high-limit thermostat. Any open safety device, a broken element, or a failed control component can stop heating while the motor and drum still run. Diagnosing heating problems requires a few basic checks: confirm the dryer is getting the correct voltage (240V for electric models), listen for the motor running, and determine whether any safety devices are open. Start with the thermal fuse and heating element — they’re the most common causes. If those check OK, test the cycling thermostat/thermistor and look for wiring or control board issues. Always unplug the dryer before doing continuity checks or part replacements.
Common Symptoms
Dryer runs (drum tumbles) but produces little or no heat; clothes remain damp after a full cycle; drying times are much longer than usual; sometimes a burning smell before failure.
Common Causes
- Open/blown thermal fuse (safety device) or high-limit thermostat
- Failed heating element assembly (open coil)
- Faulty cycling thermostat/thermistor or wiring/control board issue
Popular Parts That Fix This Problem
These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at PartsDiscount.com — just search by your appliance model number for a guaranteed fit.
Helpful Repair Tip
Unplug the dryer and use a multimeter to check continuity first: thermal fuse and heating element are quick to test. An open thermal fuse is a very common, inexpensive fix — replace it if it reads open.
Frequently Asked Questions
How do I test the thermal fuse on my Samsung dryer?
Unplug the dryer. Locate the thermal fuse (usually on the blower housing or exhaust duct). Remove the connector and use a multimeter set to continuity or ohms. A good fuse should show continuity (close to 0 ohms). If it reads OL/open, the fuse is blown and must be replaced. Note: thermal fuses blow when a dryer overheats — fix any airflow/venting problems before replacing.
Can I replace the heating element myself, and what safety steps should I take?
Yes, replacing the heating element is commonly a DIY job if you are comfortable with basic appliance disassembly. Safety steps: unplug the dryer (and turn off power at the breaker for extra safety), take photos of wiring before disconnecting, discharge any capacitors if present, and use the correct replacement part for the DV400EWHDWR/AA-00. Also inspect/clean the exhaust vent and lint pathways before reassembly to prevent repeat failure.
Real DIY Repair Stories
Be the first to share your repair story!
Share Your Repair Story
Your experience helps other homeowners fix their appliances. Tell us how it went!
Can't Fix It Yourself? Find a Local Technician
It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.
Find the Right Part for Your Appliance
Don't guess — search your exact appliance model number at PartsDiscount.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.
Your Free Parts Videos
Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to PartsDiscount.com where you can search by model number and get the right part shipped fast.