Part Number 8318314 — What Is This Part and How Do I Fix It?

Understanding the Problem

Short explanation: I can't uniquely identify part number 8318314 without the appliance brand and model. Many manufacturers reuse similar numeric sequences, so the exact function depends on the appliance (washer, dryer, refrigerator, oven, etc.). Below are practical, step-by-step instructions to identify the part, confirm it's the faulty item, and replace it safely. 1) Confirm the appliance and model - Locate the appliance's model and serial number (usually on a sticker or metal plate inside the door, behind the kickplate, on the fridge door jamb, or on the back of the appliance). - Note the full model number (not just the part number). 2) Cross-check the part number - Enter the appliance model number and "parts" into the manufacturer's parts lookup (Whirlpool, GE, Frigidaire, Samsung, etc.) or a reputable parts site. - Compare the exploded parts diagram image to the physical part in your appliance (shape, mounting points, connector type). 3) Visual inspection and documentation - Power off the appliance (unplug or shut off breaker; if gas, shut the gas off). Take clear photos of the part in place and of any wire connectors and mounting screws. - Look for burn marks, melted plastic, broken mounts, corrosion, or oil/leak residue. 4) Basic electrical testing (if the part is electrical) - Use a multimeter to check for continuity, resistance, or proper voltage as appropriate. Example: a heating element should show low resistance; a thermal fuse should show continuity when good. - If you are not comfortable with live-voltage checks, skip to ordering the part and have a pro install it. 5) Order the correct replacement - Once you confirm the part in the parts diagram matches the physical component, order by appliance model + part number from an authorized dealer or trusted parts supplier. 6) Step-by-step replacement (generalized) - Unplug the appliance or shut off power and gas. - Remove necessary access panels to reach the part (consult the parts diagram or service manual). Keep screws and small parts organized. - Photograph wire connections and take notes so you can reconnect correctly. - Disconnect wiring harnesses (release locking tabs), remove mounting screws, and remove the old part. - Install the replacement part: align, secure mounting screws, reconnect wires exactly as before, and reinstall panels. - Restore power and test the appliance for correct operation. Safety note: Always disconnect power before working inside an appliance. If the component is part of a high-voltage circuit, a sealed capacitor, or a gas system, and you are not experienced, hire a qualified technician.

Common Symptoms

Symptoms vary by part: appliance won't power on, specific functions fail (no heat, no spin, no dispense), loud noise, leaks, or visible burn/damage where the part sits.

Common Causes

• Normal wear and mechanical stress causing breakage or worn bearings
• Electrical failure from short, overload, or melted connectors
• Corrosion, water damage, or physical impact

Popular Parts That Fix This Problem

These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at ProsourceParts.com — just search by your appliance model number for a guaranteed fit.

Frequently Asked Questions