Part 11063932102 — How to Identify, Diagnose and Replace This Appliance Part

Understanding the Problem

I couldn't find an authoritative cross-reference for part number 11063932102 based on the number alone. Many OEM part numbers are specific to a brand and model; to identify what this part fixes you usually need the appliance make and model or a clear picture of the part. Below are practical, numbered steps to identify, diagnose and replace an unknown appliance part and to get an exact replacement. 1) Gather appliance info: Locate and note the appliance brand, model number and serial number (usually on a metal tag inside the door, on the back, or under the lid). This model number is the fastest way to find OEM parts and diagrams. 2) Inspect the part: Remove the access panel (see safety step 0). Photograph the part from multiple angles including any stamped numbers, connectors, wire colors, and mounting holes. Note size and whether it’s mechanical (motor, pump, door latch) or electrical (sensor, control board, switch, harness). 3) Search reliable parts sources: Use the appliance model number to search the manufacturer’s parts diagrams or reputable parts sites (RepairClinic, AppliancePartsPros, PartSelect). Enter "11063932102" in those sites — if it’s a valid OEM number it should map to a part and show compatible models. 4) Compare symptoms to part function: Once you locate the part listing, read the part’s description and compare to the symptoms you see (e.g., no heat, no spin, water won’t drain, control not responding). If the symptoms match the part’s function, proceed to diagnostics below. 5) Basic diagnostics (generic): a. Visual: Look for burned connectors, cracked plastic, corrosion, melted insulation. b. Electrical: With power off, measure continuity across fuses, thermostats, switches and motors as applicable (use meter, consult schematic). c. Mechanical: Try to move rotating parts by hand (drum, blower, motor shaft) to check seized bearings. d. Intermittent: Wiggle connectors and harnesses while observing failure to identify broken wires or intermittent faults. 6) Order the exact replacement: Use the appliance model number and confirmed part number from the manufacturer’s diagram. Avoid ordering by a lone number unless the parts site lists it as OEM-compatible. 7) Replace the part (generic replacement steps): a. Safety first—unplug the appliance or switch off the breaker and, for gas appliances, shut off gas supply. b. Remove the access panel(s) required to reach the part. Keep screws organized and take photos for reassembly. c. Label and photograph wire connections so you can reconnect correctly. Disconnect wires and remove mounting screws. d. Fit the new part, reconnect wires and fasten mounting hardware. e. Reinstall access panels, restore power/gas, and test the appliance through a full cycle. 8) If the new part doesn’t fix it: Re-check wiring, ensure the replacement matches the original exactly, and consult the wiring diagram for upstream/downstream failures (e.g., a failed control board can make a new motor appear faulty). Safety note: Always disconnect power (unplug or shut off the breaker) before accessing internal components. For gas appliances, shut off the gas and if you smell gas call a pro. If you’re not comfortable with electrical diagnostics or gas systems, hire a licensed technician.

Common Symptoms

Unknown without brand/model — typical symptoms depend on the actual part but may include: appliance not powering on, no heat, no water drain, motor not running, error codes or intermittent failures.

Common Causes

• Incorrect or incomplete part identification — OEM number may be tied to a specific model
• Electrical failure (burned connector, open circuit, short)
• Mechanical wear or physical damage to the part

Popular Parts That Fix This Problem

These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at ProsourceParts.com — just search by your appliance model number for a guaranteed fit.

Frequently Asked Questions