MED7230HW3 Dryer Not Heating – What Part Fixes This Problem?
Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.
Understanding the Problem
If your MED7230HW3 dryer tumbles but doesn't heat, the issue is usually in the heating circuit rather than the motor or drum. Common components that fail and stop heating include the thermal fuse, heating element assembly, thermostats (cycling or high-limit), or wiring/controls. Vent restrictions and an overloaded dryer can also make it seem like it isn't heating because air can't flow and clothes remain damp. Diagnosis starts with basic checks: verify the dryer is getting full power (240V for electric models), inspect the exhaust vent for blockages, and test the thermal fuse and heating element for continuity. Many of these parts are straightforward to access on the MED7230HW3, but always disconnect power before working inside the dryer. Replacing the failed component typically restores reliable heat and prevents repeat failures caused by venting problems or electrical issues.
Common Symptoms
Drum tumbles but clothes stay damp; dryer runs but never gets hot or heats weakly; dryer trips circuit breakers or stops heating mid-cycle.
Common Causes
- Blown thermal fuse due to overheating or vent restriction
- Open or shorted heating element assembly
- Faulty cycling thermostat or high-limit thermostat (safety cutouts)
- Insufficient power (missing 120V leg on electric model) or faulty terminal block
- Severely restricted exhaust vent or blocked lint trap
Popular Parts That Fix This Problem
These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at PartsDiscount.com — just search by your appliance model number for a guaranteed fit.
Helpful Repair Tip
Before replacing parts, check the vent and lint screen — restricted airflow often causes overheating trips or weak heating. Use a multimeter to test the thermal fuse and heating element for continuity; a blown thermal fuse usually indicates either a vent blockage or a failed heating component.
Frequently Asked Questions
How can I tell if the thermal fuse is the problem?
The thermal fuse is a one-time safety device that will blow if the dryer overheats (often from blocked venting). If the dryer tumbles but produces no heat and the fuse has no continuity on a multimeter, the fuse is blown. Replace the fuse only after fixing the cause (usually vent blockage) — otherwise the new fuse will blow too.
Can I replace the part myself, and how much will it cost?
Many repairs (thermal fuse, heating element, thermostats, belt) are DIY-friendly with basic tools and a multimeter; always unplug the dryer first. Parts typically range from $15–$120 depending on the component. If the issue involves the control board or electrical supply, or if you’re not comfortable working around mains voltage, hire a qualified technician to avoid injury or further damage.
Real DIY Repair Stories
Be the first to share your repair story!
Share Your Repair Story
Your experience helps other homeowners fix their appliances. Tell us how it went!
Can't Fix It Yourself? Find a Local Technician
It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.
Find the Right Part for Your Appliance
Don't guess — search your exact appliance model number at PartsDiscount.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.
Your Free Parts Videos
Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to PartsDiscount.com where you can search by model number and get the right part shipped fast.