Maytag MVWC565 — Common Problems and What Parts Fix Them
Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.
Understanding the Problem
The Maytag MVWC565 is a top-load washer that can develop a handful of recurring issues as it ages or sees heavy use. The most common service calls are: washer won't drain or spin, washer won't agitate, water fill or overflowing problems, and excessive noise or vibration. Those symptoms are usually caused by failed mechanical or electrical components that are straightforward to test and replace. Diagnosing the exact cause requires observing the symptom, checking for obvious blockages (clogged pump or hoses), and then verifying the electrical components (lid switch, motor/coupling) and mechanical parts (agitator dogs, drive coupling, shock/suspension). Many failures are incremental — for example, worn agitator dogs cause slow/no agitation, but the drive motor may still run — so isolating the part saves time and cost.
Common Symptoms
Won't drain or spin; won't agitate; fills but won't start; loud grinding or thumping during wash; water leaking from the base or hoses.
Common Causes
- Clogged drain pump or kinked drain hose
- Failed lid switch or lid lock assembly preventing motor start
- Worn agitator dogs/agitator cam or broken drive coupling causing loss of agitation/spin
Popular Parts That Fix This Problem
These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at PartsDiscount.com — just search by your appliance model number for a guaranteed fit.
Helpful Repair Tip
Start with the simplest checks: run a drain/spin cycle and listen for the drain pump; inspect hoses and the pump filter for clogs; test the lid switch with a multimeter or by tapping the switch during a cycle—if the washer responds, the lid switch is suspect.
Frequently Asked Questions
How do I know if the lid switch is bad?
A bad lid switch often prevents any motor action: the washer won’t start agitating or spinning but may fill with water. To check, start a cycle and close the lid — if nothing happens, manually depress the lid switch or use a multimeter to test for continuity. If the machine responds when the switch is manually depressed or the switch shows no continuity, replace the lid switch assembly.
Can I replace these parts myself and how much will it cost?
Many MVWC565 repairs are DIY-friendly if you have basic tools and follow safety steps (unplug washer and turn off water). Replacing a lid switch, drain pump, agitator dogs, or inlet valve is typically a 30–90 minute job. Parts cost varies: lid switches and agitator kits are usually $20–$60, pumps $40–$120, and inlet valves $30–$80. If you’re not comfortable disconnecting electrical connectors or removing the washer cabinet, hire a technician to avoid damage or injury.
Real DIY Repair Stories
Be the first to share your repair story!
Share Your Repair Story
Your experience helps other homeowners fix their appliances. Tell us how it went!
Can't Fix It Yourself? Find a Local Technician
It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.
Find the Right Part for Your Appliance
Don't guess — search your exact appliance model number at PartsDiscount.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.
Your Free Parts Videos
Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to PartsDiscount.com where you can search by model number and get the right part shipped fast.