Maytag MDG6000BWQ Dryer Thermostat & Thermal Fuse Kit – What Fixes No Heat or Overheating?
Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.
Understanding the Problem
If your Maytag MDG6000BWQ dryer is not heating, overheats, or shuts off mid-cycle, the most likely culprits are the thermal fuse and the temperature thermostats (cycling or high-limit). The thermal fuse is a one-time safety device that opens when excessive heat is detected; when it fails, the dryer will not run the heat circuit. Thermostats regulate operating temperature and will disable the heating element or gas valve if they detect unsafe temperatures. Lint buildup, restricted venting, or a failing thermostat can cause the dryer to run hotter than designed and blow the thermal fuse or trip a high-limit thermostat. Replacing the defective thermostat(s) and/or the thermal fuse is a common, low-cost repair, but you should always confirm the failing component with basic tests and ensure vents and the burner assembly (for gas models) are clean before replacing parts.
Common Symptoms
No heat or intermittent heat, dryer starts but won't heat, dryer overheats and trips, dryer runs but gas burner won't ignite (gas models), or dryer shuts off mid-cycle.
Common Causes
- Blown thermal fuse caused by high exhaust temperatures or restricted venting
- Failed cycling thermostat or high-limit thermostat that no longer closes/open correctly
- Blocked or restricted venting and lint buildup causing overheating and part failure
Popular Parts That Fix This Problem
These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at PartsDiscount.com — just search by your appliance model number for a guaranteed fit.
Helpful Repair Tip
Unplug the dryer and turn off the gas (for gas models). Remove the rear panel or lower front to access the thermal fuse and thermostats. Test each component for continuity with a multimeter — a blown thermal fuse or an open thermostat will show infinite resistance (OL). Also visually inspect venting and the burner area for lint and obstructions before replacing parts.
Frequently Asked Questions
How do I know whether the thermal fuse or a thermostat is bad?
The fastest check is a continuity test with a multimeter. With the dryer unplugged and parts disconnected, an intact thermal fuse or thermostat should show near-zero resistance (continuity). A blown thermal fuse or open thermostat will read infinite resistance (OL). Also inspect for signs of overheating or soot at the terminal; if venting is blocked, fix vent problems first because a new fuse will likely blow again if the root cause isn't addressed.
Can I replace the thermal fuse or thermostat myself, and do I need any other parts?
Yes — if you are comfortable with basic tools, you can replace these parts yourself. Always unplug the dryer and shut off gas for gas models before starting. Besides the replacement part(s), you may need wire connectors or quick-disconnect terminals, and it’s a good idea to clean the lint from the cabinet, blower housing, and vent hose. After replacement, test the dryer on a short cycle and monitor vent temperature and airflow to ensure the repair fixed the root cause.
Real DIY Repair Stories
Be the first to share your repair story!
Share Your Repair Story
Your experience helps other homeowners fix their appliances. Tell us how it went!
Can't Fix It Yourself? Find a Local Technician
It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.
Find the Right Part for Your Appliance
Don't guess — search your exact appliance model number at PartsDiscount.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.
Your Free Parts Videos
Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to PartsDiscount.com where you can search by model number and get the right part shipped fast.