Maytag Dishwasher Leaking — How to Find and Fix the Leak
Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.
Understanding the Problem
A leak from a Maytag dishwasher can come from several places: the door seal, the water inlet, drain lines, pump seals, or connections behind the appliance. Leaks may be steady drips, puddles only after a cycle, or visible water while the dishwasher is running. Identifying where water first appears is the key to finding the failed component. Some leaks are simple — a loose hose clamp or worn door gasket — while others require replacing the pump/sump or inlet valve. Before replacing parts, visually inspect hoses and seals and run a short cycle while observing to narrow the source. Always disconnect power and shut off the water supply before removing panels or replacing components.
Common Symptoms
Puddles or wet floor under the dishwasher, water dripping during a cycle, visible spray from inside while running, moisture around door seams, occasional error codes or unusual noise from pump area.
Common Causes
- Worn or torn door gasket/door boot allowing water to escape the door seal
- Faulty door latch or strike preventing a tight door closure
- Loose or damaged drain hose or hose clamp
- Leaking water inlet/solenoid valve at the back of the machine
- Failed sump/pump seal or cracked pump housing
- Cracked tub or a hairline fracture in the inner tub
- Detergent dispenser or diverter gasket failure
- Obstructed or misaligned spray arm causing water to spray toward the door
Popular Parts That Fix This Problem
These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at PartsDiscount.com — just search by your appliance model number for a guaranteed fit.
Helpful Repair Tip
Run a short wash and watch for water using a flashlight and paper towels around the base, door seam, and behind the unit; that pinpointed location tells you which part to inspect first (door area → door gasket/latch; underneath → pump/inlet/hoses).
Frequently Asked Questions
Can I fix a Maytag dishwasher leak myself?
Yes, many leaks can be fixed by a competent DIYer: turn off power and water, remove the toe kick, run a test cycle to trace the leak, then replace the failed hose, clamp, door gasket, or latch. Replacing pump or inlet valve parts is intermediate-level work. If the leak is from a cracked tub or a complex pump replacement, consider a pro to avoid further damage.
How much will it cost to repair a leaking Maytag dishwasher?
Cost depends on the failed part: replacement door gaskets or hoses often cost $15–$60 in parts; inlet valves and dispensers run $40–$120; pump/motor assemblies or sump repairs typically range $100–$300 for parts. Labor from a technician usually adds $100–$250 depending on region and complexity.
Real DIY Repair Stories
Be the first to share your repair story!
Share Your Repair Story
Your experience helps other homeowners fix their appliances. Tell us how it went!
Can't Fix It Yourself? Find a Local Technician
It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.
Find the Right Part for Your Appliance
Don't guess — search your exact appliance model number at PartsDiscount.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.
Your Free Parts Videos
Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to PartsDiscount.com where you can search by model number and get the right part shipped fast.