LG Dryer Shows "d" or "dE" – What Part Fixes This Problem?
Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.
Understanding the Problem
If your LG dryer displays a single letter 'd' (sometimes shown as 'dE' on certain models) or refuses to start and the door appears closed, the machine is signaling a door-related fault. This code means the dryer thinks the door is open or that the door circuit is not completing — so the drum won't spin or the cycle won't begin. The cause is often a faulty door switch, a broken door latch/strike, a damaged door cable/harness, or less commonly a failed control board. Diagnosing this problem is usually straightforward with a visual inspection and a multimeter. Start by checking the latch and door strike for physical damage and then test the door microswitch for continuity when the door is closed. If the switch and latch look and test fine, inspect the wiring harness between the door and the main control and consider the electronic control board as the last resort. Replacing the defective part typically resolves the code and restores normal operation.
Common Symptoms
Dryer displays 'd' or 'dE', won't start, stops mid-cycle, or starts only when the door is tapped/held; door looks closed but machine behaves as if open.
Common Causes
- Faulty door microswitch (no continuity when door is closed)
- Broken or misaligned door latch/strike (won't activate the switch)
- Damaged door wiring harness or loose connector to the control board
- Occasionally a failed main control board that doesn't register the door switch signal
Popular Parts That Fix This Problem
These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at PartsDiscount.com — just search by your appliance model number for a guaranteed fit.
Helpful Repair Tip
With the dryer unplugged, press the door switch actuator by hand and check continuity with a multimeter — the switch should show continuity when the door is closed. If it doesn't, replace the door switch.
Frequently Asked Questions
Can I clear the 'd' code by unplugging the dryer?
Power-cycling (unplugging for 1–2 minutes) can reset the control and clear temporary faults, but if the underlying door circuit fault remains (bad switch, latch, or wiring) the code will return. Use a reset only as a first quick check.
Is this an expensive repair and can I replace the part myself?
Replacing the door switch or latch is a relatively inexpensive repair and is often doable by a handy homeowner with basic tools. Always unplug the dryer first, remove the top or front panel per your model’s service instructions, and test the switch with a multimeter before buying parts. If the wiring or control board is faulty, costs and complexity increase and you may prefer a professional technician.
Real DIY Repair Stories
Be the first to share your repair story!
Share Your Repair Story
Your experience helps other homeowners fix their appliances. Tell us how it went!
Can't Fix It Yourself? Find a Local Technician
It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.
Find the Right Part for Your Appliance
Don't guess — search your exact appliance model number at PartsDiscount.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.
Your Free Parts Videos
Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to PartsDiscount.com where you can search by model number and get the right part shipped fast.