LG DLGX500 Dryer Not Heating – What Part Fixes This Problem?
Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.
Understanding the Problem
If your LG DLGX500 drum tumbles but the dryer doesn't produce heat, the issue is usually a failed component in the heating or safety chain, or an airflow problem causing overheating shutdowns. Electric models rely on a heating element and thermostats; gas models use an igniter and gas valve coils. In either case, a single open thermal fuse, failed thermostat, broken heating element/igniter, or clogged venting can stop the dryer from producing warm air. Diagnosis is straightforward with a multimeter and some visual checks. Start by confirming power to the dryer and that the drum spins. Next, check airflow at the exhaust and remove the lint screen to inspect for blockages. Then test the thermal fuse, thermostats, and heating element or igniter for continuity. Replacing the failed part typically restores heat, but always confirm airflow and exhaust are clear to prevent repeat failures and safety hazards.
Common Symptoms
Dryer tumbles but clothes remain cold or only slightly warm; long drying times; dryer runs then trips off; burning/musty smell if vent is clogged.
Common Causes
- Blown thermal fuse (safety cutoff)
- Open/failed heating element (electric) or failed igniter/gas valve coils (gas)
- Faulty high-limit or cycling thermostat
- Blocked or restricted venting / poor airflow causing thermal fuse to blow
- Faulty control board or relay (rare)
Popular Parts That Fix This Problem
These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at PartsDiscount.com — just search by your appliance model number for a guaranteed fit.
Helpful Repair Tip
First check the exhaust airflow — a blocked vent can cause overheating and trip safety fuses. Use a multimeter to test the thermal fuse and heating element/igniter for continuity; an open reading usually identifies the faulty part.
Frequently Asked Questions
How do I test whether the thermal fuse is the problem?
Unplug the dryer, access the thermal fuse (usually on the blower housing or exhaust duct), and remove its connectors. Use a multimeter set to continuity or ohms — a good fuse shows continuity (near 0 ohms). If it reads open (OL), the thermal fuse is blown and must be replaced. Also inspect for clogged vents; a blown thermal fuse often indicates poor airflow.
Can I run the dryer if the heating element or igniter is faulty?
You can run the dryer drum without heat, but it will not dry clothes effectively. Don’t bypass safety devices (like thermal fuses or thermostats) — doing so is unsafe and can cause fires. Replace the faulty heating element, igniter, or gas valve coils and correct any vent restrictions before returning the dryer to normal use.
Real DIY Repair Stories
Be the first to share your repair story!
Share Your Repair Story
Your experience helps other homeowners fix their appliances. Tell us how it went!
Can't Fix It Yourself? Find a Local Technician
It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.
Find the Right Part for Your Appliance
Don't guess — search your exact appliance model number at PartsDiscount.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.
Your Free Parts Videos
Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to PartsDiscount.com where you can search by model number and get the right part shipped fast.