Hey there! The info here is for educational purposes only — every appliance is different, so your experience may vary.

When in doubt, always reach out to a certified repair technician to stay safe!

Leaking Washer (WT) – How to Find the Source and What Parts Fix It

Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.

Understanding the Problem

A washer that leaks water (often reported as 'WT' by technicians or in shorthand for washer top/load) can show puddles under the machine, water on the floor around the front, or dampness from the rear. Leaks can appear during fill, wash/agitate, drain, or spin cycles. The source may be an external hose, an internal hose or clamp, a failed water inlet or drain pump, a torn door boot (front-load), or a cracked tub or dispenser assembly. Finding the exact origin is the first step: some leaks are easy to spot (loose hose or visible crack), while others only appear during a specific cycle and may require observing the washer while it runs. Small leaks left unattended will damage flooring and create mold, so it's important to diagnose and repair quickly. Many common causes are user-serviceable; others need a technician and possibly replacement parts or seals to restore a watertight machine.

Common Symptoms

Puddles under the machine, water at rear or front during specific cycles, dripping from hoses, wet laundry after spin, or continuous floor dampness near the dispenser or door.

Common Causes

  • Loose or damaged inlet hoses or hose clamps
  • Failed water inlet valve leaking while filling
  • Cracked or clogged drain pump or pump housing
  • Worn, torn, or detached door boot (front-load) or lid seal
  • Split or disconnected tub-to-pump and drain hoses
  • Faulty detergent dispenser or dispenser housing overflow
  • Cracked outer or inner tub (rare but possible)
  • Loose connections or damaged fittings at the back of the washer

Popular Parts That Fix This Problem

These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at PartsDiscount.com — just search by your appliance model number for a guaranteed fit.

Standard 3/4" garden-hose thread supply hose; example kit numbers: Danco 88837, Whirlpool 4392868 (eFill/Inlet Hoses (supply hoses with washers)
Common examples: Whirlpool W10557827; LG 5221ER1002B; Samsung DC62-00361A (verify model compatibilitWater Inlet Valve (controls incoming water)
Common examples: Whirlpool WPW10186932; LG 4681EA2001X; Samsung DC97-14424A (verify fit)Drain Pump (removes wash water)
Example numbers: Whirlpool WPW10456329; generic OEM drain hose assemblies often sold by model numberTub-to-Pump / Drain Hose (internal and rear drain hose)
Common examples: LG 4986ER0002A / 4986ER0002D; Whirlpool 279838 (brands/models vary)Door Boot Seal / Bellows (front-load leak at door)
Examples: Whirlpool W10844470; LG 4986ER1001A; check model-specific dispenser partDispenser Assembly / Detergent Drawer (leaking from dispenser)
Part numbers vary widely by model; provide machine model to supplier for correct partTub Seal / Outer Tub Gasket (seal around transmission or shaft)
Standard 1/2"–1" stainless worm-gear hose clamps; examples: Ideal-Tridon 8-12mm or general-purpose kHose Clamps and Fasteners (worm-gear clamps)
Pro tip incoming! 🧠

Helpful Repair Tip

Place dry paper towels around and under the washer, run a short rinse cycle, and watch where wetness first appears; this pinpoints the leak location quickly.

Frequently Asked Questions

Can I fix a leaking washer myself?

Yes for many leaks: replacing a supply hose, tightening or replacing hose clamps, swapping a worn drain pump hose, or replacing a torn door boot on front-loaders are tasks many DIYers can handle. Always unplug the washer and shut off water before working on it. For internal component replacements (pump, valve, tub seal) review model-specific guides and use replacement parts matched to your machine. If the tub itself is cracked or if you’re uncomfortable handling electrical components, call a professional.

How much does it cost to repair a leaking washer?

Cost varies by cause: replacing supply hoses or clamps can be $10–$40 in parts; a drain pump or inlet valve typically costs $40–$150 for the part plus $100–$250 labor if you hire a technician. Replacing a door boot or major tub repair can be $150–$400+ depending on brand and labor. Always get a diagnosis first—repair cost depends on the exact failed part and accessibility.

Real stories from real fixers!

Real DIY Repair Stories

Be the first to share your repair story!

Share Your Repair Story

Your experience helps other homeowners fix their appliances. Tell us how it went!

Minimum 10 characters.

No shame in calling a pro! 🛠️

Can't Fix It Yourself? Find a Local Technician

It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.

You got this! Find your part! 💪

Find the Right Part for Your Appliance

Don't guess — search your exact appliance model number at PartsDiscount.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.

Your Free Parts Videos

Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to PartsDiscount.com where you can search by model number and get the right part shipped fast.

🔔 🔔 Sign Up for the Next Video Drop! Plus Coupon Codes. Tips & More!

Join our free email list. Be the first to know about new repair videos, exclusive coupon codes, and handy tips!