KitchenAid KSCS25INSS00 Ice Maker Replacement – What You Need to Fix It
Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.
Understanding the Problem
If your KitchenAid KSCS25INSS00 has stopped producing ice, is making small or hollow cubes, or is leaking/won't dispense, the built-in ice maker assembly or its water supply components are the most likely culprits. Over time the ice maker motor/module, fill valve, or the mechanical harvest mechanism can fail. Other causes include clogged filters, frozen fill tubes, or temperature problems in the freezer that prevent the unit from cycling properly. Replacing the ice maker on this model is usually a straightforward repair: shut off power and water, remove the ice bin and any shelves blocking access, unplug the ice maker harness, remove mounting screws, swap the assembly, reconnect the harness and water, then test. Always verify the replacement part matches your model and serial number before ordering — KitchenAid often supplies model-specific assemblies or kits that include the harness and fill tube components.
Common Symptoms
No ice production, ice maker not cycling or clicking, continuous water leaking/dripping into the ice bin, small or hollow ice cubes, or ice dispenser not dispensing.
Common Causes
- Failed ice maker assembly (motor/module or harvest mechanism)
- Faulty water inlet/fill valve or blocked/frozen fill tube
- Clogged water filter or freezer temperature too warm for proper cycling
Popular Parts That Fix This Problem
These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at PartsDiscount.com — just search by your appliance model number for a guaranteed fit.
Helpful Repair Tip
Confirm the ice maker is faulty by removing the ice bin, forcing a manual harvest cycle (if your unit has a test/diagnostic), or checking for continuity at the ice maker module and for 120 VAC/solenoid voltage at the water inlet valve during a fill. If the ice maker never cycles but the freezer is cold, the ice maker assembly is likely bad.
Frequently Asked Questions
Can I replace the ice maker myself on the KSCS25INSS00?
Yes — if you’re comfortable turning off power and water, using basic hand tools, and handling a small wiring harness. Replacement typically involves removing the ice bin and shelf, unplugging the harness, removing 2–4 mounting screws, swapping the assembly, reconnecting the harness and water, and testing. If you’re unsure, take a picture of connections before disconnecting or call a certified technician.
How do I confirm I need a whole ice maker assembly rather than just the water filter or valve?
Start with simple checks: replace or bypass an old water filter and confirm water supply to the fridge. Listen for the inlet valve when a fill should occur; if you hear a click but no water, the valve may be clogged or failed. If the motor or harvest cycle never runs, or the unit shows mechanical damage or ice buildup at the ejector, the ice maker assembly is likely the failed component. Use a multimeter to check continuity on the ice maker module and to verify voltage to the valve during a fill cycle.
Real DIY Repair Stories
Be the first to share your repair story!
Share Your Repair Story
Your experience helps other homeowners fix their appliances. Tell us how it went!
Can't Fix It Yourself? Find a Local Technician
It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.
Find the Right Part for Your Appliance
Don't guess — search your exact appliance model number at PartsDiscount.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.
Your Free Parts Videos
Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to PartsDiscount.com where you can search by model number and get the right part shipped fast.