For educational purposes only. Always consult a certified technician when unsure.

Kenmore Cabrio Washer Not Draining – What Part Fixes This Problem?

Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.

Understanding the Problem

If your Kenmore Cabrio washer fills but doesn't drain, water will remain in the tub at the end of the cycle or the machine may stop with an error code. This is usually caused by a blocked or failed drain path (pump, hose or filter) or an electrical issue preventing the pump from running. The machine may make humming sounds, click, or show error codes like OE/nd or F7/F8 depending on the model. Start with simple, non‑technical checks: inspect the drain hose for kinks, check the standpipe or utility sink for clogs, and remove any visible debris from the washer's drain trap or coin trap. If the hose and trap are clear, the most common failing component is the drain pump; it may be jammed by debris, have a broken impeller, or the pump motor may have failed and needs replacement.

Common Symptoms

Water remains in tub after cycle, washer stops mid-cycle, humming noise from pump area, visible clog or backed-up drain, OE/nd or similar drain error codes.

Common Causes

  • Clogged drain pump filter or coin trap blocked by lint, coins, or debris
  • Kinked, crushed, or clogged drain hose or blocked household drain/standpipe
  • Failed drain pump motor or broken impeller preventing water movement
  • Faulty lid/door lock or control board not sending power to the pump

Popular Parts That Fix This Problem

These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at ProsourceParts.com — just search by your appliance model number for a guaranteed fit.

varies by model — check the washer's model tag (common/compatible numbers may include units listed aDrain Pump Assembly
varies — some Cabrio models have an access filter; check model-specific part numberDrain Pump Filter / Coin Trap (access cover)
universal/varies — replace with OEM hose sized to model; check model tagDrain Hose (outlet hose)
model-dependent — used on models that will not run pump if door/lid not lockedLid Lock / Door Lock Assembly
model-dependent — replace only after verifying pump and wiring are goodMain Control Board / Electronic Control
Pro tip incoming! 🧠

Helpful Repair Tip

Run a drain & spin or drain-only cycle while listening at the pump area — if you hear the pump hum but water doesn’t move, the pump is likely jammed or failed; if you hear nothing, check the pump wiring and lid/door lock before replacing the pump.

Frequently Asked Questions

How much does it cost to fix a Kenmore Cabrio that won't drain?

Cost depends on the failed part and whether you do it yourself. If it's a clog you can clear, it's free. A replacement drain pump normally runs between $50–$150 for parts depending on the supplier and model; add labor if you hire a technician (typically $100–$200). Always confirm the correct part number for your specific Kenmore Cabrio model before purchasing.

Can I fix this myself, and is it safe to replace the drain pump?

Yes, many homeowners can replace the drain pump themselves if they are comfortable with basic appliance repairs. Main steps: unplug power, turn off water, drain remaining water, access the pump (front or bottom panel), inspect and remove debris, test wiring with a multimeter, then replace the pump if needed. If you are not comfortable working with electrical connections, lifting the washer, or diagnosing wiring/control issues, hire a professional. Always disconnect power before any service.

Related How-To Videos

Real stories from real fixers!

Real DIY Repair Stories

Be the first to share your repair story!

Share Your Repair Story

Your experience helps other homeowners fix their appliances. Tell us how it went!

Minimum 10 characters.

No shame in calling a pro! 🛠️

Can't Fix It Yourself? Find a Local Technician

It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.

You got this! Find your part! 💪

Find the Right Part for Your Appliance

Don't guess — search your exact appliance model number at ProsourceParts.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.

Your Free Parts Videos

Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to ProsourceParts.com where you can search by model number and get the right part shipped fast.