Kenmore 110.21302013 Dryer — Common Problems and How to Fix Them
Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.
Understanding the Problem
The Kenmore 110.21302013 is a common dryer model and can develop typical faults over time: it may not heat, fail to start, make unusual noises, or take too long to dry. These symptoms usually point to a handful of replaceable components (thermal fuse, heating element, thermostats, drive belt or motor, and rollers/pulley assemblies), or to airflow problems caused by a clogged vent. Because many parts are interdependent, one failure can cause secondary symptoms (for example, a bad motor can make the drum not turn and also cause poor air circulation). Repair is usually straightforward for a competent DIYer with basic hand tools and a multimeter. Always confirm the model tag and voltage type before ordering parts, and follow basic safety: unplug the dryer (and turn off gas if it’s a gas model) before opening the cabinet. If you’re not comfortable working with electrical components or gas, consider a qualified technician.
Common Symptoms
Dryer runs but doesn't heat; dryer won't start; drum won't turn; loud squealing or thumping; takes too long to dry or overheats.
Common Causes
- Blown thermal fuse or open high-limit thermostat
- Failed heating element or failed heating circuit components (cycling thermostat, relay)
- Motor, belt, or drum support parts worn out (rollers, idler pulley) causing no-tumble or noise
Popular Parts That Fix This Problem
These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at PartsDiscount.com — just search by your appliance model number for a guaranteed fit.
Helpful Repair Tip
Start by checking the dryer’s vent and lint screen, then test the thermal fuse and heating element for continuity with a multimeter — those two are the most common causes when the dryer runs but doesn't heat.
Frequently Asked Questions
How do I confirm whether the dryer is electric or gas?
Check the model tag (usually on the door opening or the back of the dryer). It will list the model and the electrical rating (e.g., 120/240V) or show a gas information sticker. If you see a gas supply line and gas valve on the back, it’s a gas dryer. Always verify before ordering heating components.
Can I replace the thermal fuse or heating element myself?
Yes — replacing the thermal fuse or heating element is a common DIY repair if you have basic tools. Unplug the dryer (and shut off gas for gas models), remove the rear panel or front panel per service instructions, test the suspected part with a multimeter, and replace it if it reads open. Always verify part compatibility with the model tag and follow safety precautions. If you’re unsure about electrical or gas connections, hire a professional.
Real DIY Repair Stories
Be the first to share your repair story!
Share Your Repair Story
Your experience helps other homeowners fix their appliances. Tell us how it went!
Can't Fix It Yourself? Find a Local Technician
It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.
Find the Right Part for Your Appliance
Don't guess — search your exact appliance model number at PartsDiscount.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.
Your Free Parts Videos
Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to PartsDiscount.com where you can search by model number and get the right part shipped fast.