Kenmore 110.21302013 Washer — Troubleshooting & What Part Fixes This Issue
Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.
Understanding the Problem
The Kenmore 110.21302013 is a common top-load washer that can present several standard faults as it ages: it may not start, not spin or drain, leak, or make loud noises. These symptoms typically point to a handful of replaceable components such as the lid switch, drain pump, motor coupling/clutch (on direct-drive designs), water inlet valve, or control/timer. Before replacing parts, simple tests and visual checks usually identify the failed item. Diagnosing this model starts with basic observation: listen and watch during a cycle, check for visible leaks, note error codes (if any) or unusual behavior (cycles stopping mid-run, heavy vibration). Many problems are caused by a failed lid switch or clogged/failed drain pump; others stem from worn drive components or an electrical/control fault. The steps below help you narrow the cause and pick the correct replacement part or decide if professional service is needed.
Common Symptoms
Washer won't start or respond, won’t spin or drain, loud grinding or squealing noises, water remains in tub or washer leaks, cycles stop or won’t advance.
Common Causes
- Failed lid switch or door/lid interlock preventing motor operation
- Clogged or failed drain pump causing no-drain/no-spin issues
- Worn motor coupling, belt, clutch, or drive components causing noise or no-spin
Popular Parts That Fix This Problem
These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at PartsDiscount.com — just search by your appliance model number for a guaranteed fit.
Helpful Repair Tip
Start with the simplest checks: verify the lid switch by operating the lid while attempting a spin/drain—if the washer only spins with the lid forced closed, the lid switch is likely faulty. For draining issues, remove the pump inlet hose and check for debris before replacing the pump.
Frequently Asked Questions
How do I confirm whether the lid switch is bad?
First, try a simple functional test: with the washer powered on, press the lid switch manually (some models have an accessible actuator) and try to start a spin/drain cycle. If the washer runs only when the switch is pressed, the switch is likely bad. For a definitive check, remove power and test the lid switch for continuity with a multimeter — no continuity when actuated indicates failure. Always disconnect power before testing or replacing parts.
Can I replace these parts myself or should I hire a technician?
Many common repairs on this Kenmore model (lid switch, drain pump, water inlet valve, motor coupling) are DIY-friendly if you have basic tools and follow safety steps (unplug washer, shut off water). However, if the problem is electrical, intermittent, or involves the control/timer, or if you’re uncomfortable disassembling the cabinet, hiring a qualified appliance technician is recommended. If you decide to DIY, take photos during disassembly and confirm OEM part numbers from the model/serial tag before ordering parts.
Real DIY Repair Stories
Be the first to share your repair story!
Share Your Repair Story
Your experience helps other homeowners fix their appliances. Tell us how it went!
Can't Fix It Yourself? Find a Local Technician
It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.
Find the Right Part for Your Appliance
Don't guess — search your exact appliance model number at PartsDiscount.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.
Your Free Parts Videos
Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to PartsDiscount.com where you can search by model number and get the right part shipped fast.