73-3757-00-08 — What Appliance Part Is This and What Does It Fix?

Understanding the Problem

You provided the part number 73-3757-00-08 but not the appliance make/model. That part number is not uniquely recognizable across major OEM databases without the appliance context. Below are clear, numbered diagnostic and repair steps you can follow now to identify the part, confirm whether it is the failed component, and safely replace it once identified. 1) Find the appliance model and serial number: Locate the appliance's model tag (inside door frame, behind kick plate, on side or back). Note full model and serial — this is the key to correct part lookup. 2) Inspect the part on the appliance: Open access panels (see safety below) and take a clear photo of the part, any stamped numbers, connectors, and where it mounts. Note color, shape, number of wires/terminals, and any visible damage (burning, corrosion, breaks). 3) Search OEM and major parts sites using both the appliance model and 73-3757-00-08: Use appliancepartspros.com, repairclinic.com, searspartsdirect.com, partselect.com and the manufacturer's parts lookup page. If a match appears under your appliance model, read the part description and fit notes carefully. 4) Cross-reference alternative part numbers: Many parts have alternate numbers or superseded numbers. If you find a match, check the "also known as" or cross-reference list on the part page. 5) Confirm function before replacement: Once identified, learn what the part does (control board, door latch, thermostat, valve, etc.). Run the diagnostic tests related to that part (continuity, resistance, actuate outputs) to confirm failure. For electrical parts use a multimeter: check for proper voltage, continuity, and compare readings to the service manual specifications. 6) Obtain correct replacement: Order the exact OEM part for your appliance model or an approved equivalent. Avoid buying solely by this number without model confirmation. 7) General replacement steps (after confirming part identity): a) Unplug the appliance or shut off power at the breaker; for gas appliances, turn off gas supply. b) Turn off water supply for washers/dishwashers if applicable. c) Remove access panels or covers to reach the part. Keep track of screws and fasteners. d) Photograph or label each connector and wire before disconnecting. e) Remove the old part, transfer any mounting hardware if needed, and install the new part in the same orientation. f) Reconnect wiring exactly as removed, secure panels, restore power/water/gas, and run a diagnostic/test cycle. Safety note: Always disconnect power before working on appliances. If you are not comfortable working with mains electricity, gas, or refrigerants, hire a qualified technician. Incorrect part replacement can create fire, shock, or gas-leak hazards.

Common Symptoms

Symptoms depend entirely on what the part actually is. Typical signs include: appliance won't start or run, intermittent operation, error codes on the display, leaks, loud unusual noises, or failure of specific functions (e.g., no water inlet, no heat, door won't latch).

Common Causes

• The part number is OEM-specific and must be matched to the appliance model to confirm fit
• Normal wear or electrical failure of the component (burnt traces, failed motor, weak solenoid, worn latch)
• Installation of an incorrect or superseded replacement part

Popular Parts That Fix This Problem

These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at ProsourceParts.com — just search by your appliance model number for a guaranteed fit.

Frequently Asked Questions