Ice Maker Replacement – What Part Fixes This Problem?
Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.
Understanding the Problem
When your refrigerator stops making ice, makes small or misshapen cubes, overflows, or leaks, the ice maker assembly or one of its supporting parts is often the cause. Problems can be caused by a failed ice maker motor or mold heater, a malfunctioning water inlet valve, a clogged or frozen fill tube, or an electrical/connector fault. Identifying whether the ice maker itself failed or a supply/controls issue is the key to an effective repair. Replacing the ice maker assembly fixes many of the most common symptoms, but not every issue requires a full ice maker replacement. In some cases replacing the water inlet valve, heater/defrost part on the fill tube, or just a wiring harness or thermostat will restore function. Always confirm the root cause with a few simple tests before ordering parts to avoid unnecessary expense and downtime.
Common Symptoms
No ice production, small or hollow cubes, continuous water flow or leaking, ice stuck in the mold, loud clicking or humming during harvest, or refrigerator error codes related to the ice system.
Common Causes
- Failed ice maker assembly (motor, mold heater, or ejector mechanism)
- Faulty water inlet valve or low water pressure to the fill tube
- Frozen or clogged fill tube, bad thermostat/thermistor, or wiring/connectors failure
Popular Parts That Fix This Problem
These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at PartsDiscount.com — just search by your appliance model number for a guaranteed fit.
Helpful Repair Tip
Confirm the faulty part by putting the ice maker into a diagnostic or harvest cycle (manufacturer-specific) and watching whether it attempts to fill and eject. If it attempts but no water flows, check the inlet valve and water supply; if it doesn’t cycle, test the ice maker for continuity and power.
Frequently Asked Questions
Can I replace the ice maker myself?
Yes — many homeowners can replace an ice maker with basic tools (screwdriver, nut driver) and by following the refrigerator's service manual. Turn off the refrigerator power and water line first. If the issue involves the water inlet valve or sealed components, or you’re unsure about model-specific steps, consider a technician.
How long does an ice maker replacement take and how much does it cost?
A straightforward ice maker assembly swap typically takes 30–90 minutes for a competent DIYer. Part costs vary widely by brand and model — expect $50–$200 for aftermarket or OEM ice maker assemblies and $30–$100 for related parts like the inlet valve. Labor rates for a pro will add to the total if you hire service.
Real DIY Repair Stories
Be the first to share your repair story!
Share Your Repair Story
Your experience helps other homeowners fix their appliances. Tell us how it went!
Can't Fix It Yourself? Find a Local Technician
It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.
Find the Right Part for Your Appliance
Don't guess — search your exact appliance model number at PartsDiscount.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.
Your Free Parts Videos
Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to PartsDiscount.com where you can search by model number and get the right part shipped fast.