GE PDW1860N00SS Lower Rack Wheel 8-Pack – What Part Fixes a Broken Lower Rack Wheel?
Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.
Understanding the Problem
Brief explanation: The lower rack wheels (rollers) let the lower rack glide smoothly on its rails. Over time the plastic wheel, axle or retaining clip can crack, wear out, or fall off — causing the rack to bind, sag, or derail. An 8-pack of lower rack wheels replaces all lower-wheel positions so the rack moves evenly and reliably. Diagnostic and repair steps: 1) Visual inspection: Pull the lower rack out and look at each wheel. Check for cracks, missing wheels, flat spots, wobble, or broken/missing axle clips. Manually roll each wheel—if it doesn’t spin smoothly or binds, it needs replacement. 2) Identify the style: Confirm your dishwasher uses snap-on round roller wheels (most GE PDW-series use small plastic rollers on a pivot post). Take a clear photo or bring one wheel to a parts supplier to match style. 3) Buy the correct kit: Get an 8-pack of lower rack wheels made for GE (common OEM kit sold as lower rack wheels / roller kit). Buying all 8 at once ensures even wear and avoids repeated repairs. 4) Prepare the dishwasher: Remove dishes from the lower rack and slide the rack fully out. It’s not necessary to shut off water, but for safety turn the dishwasher off at the control or breaker to prevent accidental cycles. Wear gloves to protect your hands from sharp edges. 5) Remove old wheels: Most wheels simply snap off their mounting posts or detach by releasing a small C-clip or retainer. Use a flat screwdriver or needle-nose pliers to pry off the retainer clip if present, then slide the wheel off the post. Keep track of any tiny clips. 6) Inspect posts and clips: If the post or clip is damaged, replace that hardware too (some kits include new clips). Clean any grime from the post and track before installing new wheels. 7) Install new wheels: Align the replacement roller over the post and press until it snaps into place. If your kit uses a separate axle and clip, slide the axle through the wheel and secure with the clip. Ensure the wheel spins freely and is seated firmly. 8) Re-seat the rack and test: Slide the rack back into the dishwasher and run it in and out to confirm smooth movement and that the rack stays on its track. Check that the door closes normally and the spray arms have clearance. 9) Final check: Do a loaded test (with a light load) to ensure nothing hits the spray arm and wheels hold under weight. Safety note: Wear gloves and eye protection when working in and around the dishwasher. Turn off electrical power to the unit at the breaker if you’ll be working underneath or removing panels. Keep small retainers and clips away from children. If posts or rails are broken (not just wheels), consider ordering the correct rail or clip parts or call a pro.
Common Symptoms
Lower rack sags or drags, rack comes off the track, wheels wobble or are missing, difficult to slide the rack, scraping/grinding when moving the rack.
Common Causes
- Normal wear of plastic wheel or bearing surface
- Broken or missing axle/retaining clip (wheel falls off)
- Cracked wheel from impact or heavy load
- Debris or hard water scale preventing the wheel from turning
Popular Parts That Fix This Problem
These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at ProsourceParts.com — just search by your appliance model number for a guaranteed fit.
Helpful Repair Tip
Confirm a faulty wheel by removing the rack and spinning each wheel—if it wobbles, has flat spots, or won’t spin, replace it. Replacing all 8 wheels at once avoids uneven wear and future sticking.
Frequently Asked Questions
Do I need to remove the entire rack to replace the lower wheels?
Yes — you should slide the lower rack completely out so you can access each wheel and the mounting posts. Removing the rack gives you the space to snap off old wheels and install replacements cleanly. You do not usually need tools beyond a flat screwdriver or needle-nose pliers for the retaining clips.
Can I replace one wheel or should I buy an 8-pack?
You can replace a single damaged wheel, but replacing all wheels (an 8-pack) is recommended because the rest are likely aged and will fail soon. Replacing all at once restores even movement and is more convenient and cost-effective in the long run.
Related How-To Videos
Real DIY Repair Stories
Be the first to share your repair story!
Share Your Repair Story
Your experience helps other homeowners fix their appliances. Tell us how it went!
Can't Fix It Yourself? Find a Local Technician
It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.
Find the Right Part for Your Appliance
Don't guess — search your exact appliance model number at ProsourceParts.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.
Your Free Parts Videos
Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to ProsourceParts.com where you can search by model number and get the right part shipped fast.