DC47-00017A — Samsung Refrigerator Part: Identification & Replacement Guide

Understanding the Problem

Brief explanation: DC47-00017A does not appear in major public Samsung parts cross‑reference lists and is commonly encountered as a stamped or printed code on an internal component or harness. That means it may be an internal subassembly number, a carrier/packaging code, or a number that needs the refrigerator model number to map to the correct OEM part. Treat DC47-00017A as a pointer — use the fridge model number and visual identification to confirm the exact component before ordering. Step-by-step identification and diagnostic steps: 1) Confirm the numbers on the appliance: open the fresh food compartment and locate the model and serial sticker (usually on the left or right wall). Note the exact model number (e.g., RF28xxxxxx). The model number is required to correctly identify DC47-00017A. 2) Photograph the part: take clear photos of the component showing any labels, connectors, mounting points, and surrounding components. Many parts share similar numbers; a photo helps parts departments confirm identity. 3) Compare with exploded diagrams: go to SamsungParts.com, AppliancePartsPros, RepairClinic, or the OEM parts diagram for your specific model and look for visually matching parts. Use the model number you recorded. 4) Identify symptoms tied to the part: relate the failing behavior (no ice, dispenser leak, no cooling, fan noise, water not flowing) to the component visible in your photos to narrow down possible matches. 5) Confirm with an authorized source: send the model number and photos to an authorized Samsung parts dealer or service center. They can cross‑reference internal numbers like DC47‑00017A against their parts database and give the correct OEM part number. General how-to-fix steps (once the correct part is identified): 1) Power & water safety: unplug the refrigerator or switch off the breaker. If working on water-using parts (valves, dispensers, ice maker), shut off the house water supply to the fridge and drain remaining water from lines. 2) Empty and protect work area: remove food, shelves, and drawers that block access. Put a towel on the floor to catch water. 3) Remove access panels: for many internal parts you'll pull off screws and remove a rear/inside access cover or control housing. Keep track of screws and their locations. 4) Document wiring and hoses: before disconnecting, photograph or label electrical connectors and water hoses. This prevents reassembly errors. 5) Disconnect and remove the old part: unplug electrical connectors, remove mounting screws, carefully remove any water line fittings (use towels/pliers as needed). If hoses use quick-connects, depress the release collar and pull out tubing. 6) Install replacement: position the new part, secure mounting hardware, reconnect electrical plugs and water lines (replace any O-rings if present), and reattach covers and shelves. 7) Test operation: restore power and water, check for leaks, and run the component through its cycle (e.g., start ice maker, run dispenser, listen for fan). Monitor for 15–30 minutes to confirm proper operation. 8) Final checks: ensure no error codes on the display and no unusual noises. If problems persist, contact authorized service and provide the model number and your work notes. Safety note: Always disconnect electrical power before working inside a refrigerator. If you are unsure about handling refrigerant, sealed system components, or complex diagnostics (evaporator, compressor), stop and call a certified appliance technician. Incorrect handling of water lines and electrical connectors can lead to leaks, shock, or further damage.

Common Symptoms

Because DC47-00017A is an internal/auxiliary part code, symptoms vary: no ice production, dispenser not dispensing, water leaks, strange noises from fan or motor, or failure of a specific control subassembly. Use model-specific diagrams to link symptom to part.

Common Causes

• DC47-00017A is an internal/manufacturer code that doesn't directly map without the fridge model number
• Typo or misread part number (a similar-sounding DC97/DA97 etc. number might be correct)
• Part is an obsolete or superseded subassembly requiring cross-reference by an authorized parts dealer

Popular Parts That Fix This Problem

These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at ProsourceParts.com — just search by your appliance model number for a guaranteed fit.

Frequently Asked Questions