AP-W10195416 — What This Part Is and How to Diagnose & Replace It

Understanding the Problem

Short version: I couldn't find a single authoritative match for AP-W10195416 without your appliance brand and model. AP- style numbers are vendor cross-reference numbers and usually map back to an OEM number (for example, Whirlpool/Maytag part numbers often start with 'W'). To help you quickly and safely fix the problem, follow these steps to identify the part, verify whether it’s the failed component, and replace it if needed. 1) Confirm the appliance and model a. Locate the appliance model and serial number (common locations: inside washer/dryer door frame, on refrigerator side wall, or on the appliance back). b. Note brand (Whirlpool, Maytag, GE, Kenmore, etc.) and full model number — this is required to correctly map AP-W10195416 to an OEM part. 2) Match the part visually and by number a. Remove the old part or take a clear photo showing any stamped numbers, connectors, mounting holes, and the surrounding components. Many times the OEM number is printed on the part itself (e.g., W10195416). b. Compare the photo against the parts diagram for your exact model on the manufacturer site or parts retailers (RepairClinic, PartSelect, AppliancePartsPros). 3) Identify common failure symptoms to see if the part is likely at fault a. Note the appliance symptom (no power, won’t start, leaks, excessive noise, no heat, error codes). b. Search the model’s error codes and the parts diagram to see which parts are tied to those symptoms. 4) Basic electrical diagnostic (if the part is electrical) a. Unplug the appliance and remove power at the breaker if needed. b. Disconnect the part and test continuity with a multimeter. Compare readings to expected values from the service manual. If the part is open (infinite resistance) when it should show continuity, it’s bad. 5) Mechanical checks (if the part is mechanical) a. Inspect for cracks, excessive wear, melted plastic, stripped threads, or warped surfaces. b. Manually move bearings, rollers, pulleys — any stiff binding, grinding, or looseness indicates replacement. 6) Ordering the correct replacement a. Use the appliance model number to order the OEM part. When in doubt, order by the OEM number shown on the parts diagram rather than only by AP- number. b. Verify fitment in the retailer’s fitment list and compare photos. 7) Replacement steps (generic — adapt to the specific part) a. Safety first: Unplug the appliance and turn off water supply (for washers/dishwashers). Wear gloves and eye protection. b. Remove the access panel(s) to reach the part. Keep track of screws and fasteners. c. Take photos of wiring and connectors before disconnecting. Label wires with tape if necessary. d. Remove mounting screws/clips and take out the old part. e. Install the new part in the same orientation, reconnect wires and hoses, secure fasteners to manufacturer torque if specified. f. Reassemble panels, restore power and water, run a short test cycle and check for proper operation and leaks. Safety note: If you’re not comfortable working with live electrical connections or gas components, or if the appliance involves gas valves or sealed refrigerant systems, stop and contact a qualified technician. Incorrect repair can cause shock, fire, gas leaks, or personal injury.

Common Symptoms

Because AP-W10195416 is cross-reference style, symptoms depend on the actual OEM part — common issues include appliance not starting, unusual noise, leaking, failure to heat, or error codes tied to the component. Identify the symptom and match it against your model's parts diagram.

Common Causes

• Normal wear and tear (bearings, rollers, seals)
• Electrical failure (open windings, shorted thermistors, failed switches)
• Physical damage or improper installation (cracked housings, broken mounts)

Popular Parts That Fix This Problem

These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at ProsourceParts.com — just search by your appliance model number for a guaranteed fit.

Frequently Asked Questions