AMV1150VAB2 Microwave Not Heating – What Part Fixes This Problem?
Need the replacement part? Search your model number at for guaranteed fit and fast free shipping.
Understanding the Problem
If your AMV1150VAB2 powers up (light, fan, turntable work) but food remains cold, the problem is almost always in the high-voltage heating circuit rather than the control board. The high-voltage circuit includes the magnetron (the actual microwave source), the high-voltage diode, the high-voltage capacitor, and the transformer. Any failure in those components will stop microwave generation while leaving lights and motors functional. Other possible causes include failed door interlock switches (which can prevent the magnetron from receiving power), a blown thermal fuse/thermostat, or very rarely a control board relay failure. Because high-voltage components store lethal charge, diagnosis and replacement should be done only if you are comfortable and competent with electrical safety and proper discharge procedures.
Common Symptoms
Microwave powers on, lamp and turntable run, control panel accepts commands and timer counts down, but food does not heat; sometimes a popping or arcing noise, or blown internal fuse.
Common Causes
- Failed magnetron (no microwave generation)
- Open or shorted high-voltage diode or failed high-voltage capacitor
- Blown thermal fuse, bad door interlock switch, or HV transformer failure
Popular Parts That Fix This Problem
These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at PartsDiscount.com — just search by your appliance model number for a guaranteed fit.
Helpful Repair Tip
Confirm the faulty part by first checking simple items: verify fuses/thermostats are not open and door switches click and measure continuity. If those are OK, discharge the HV capacitor safely and test the high-voltage diode with a multimeter (diode check) and the magnetron for continuity between filament pins (and for near-infinite resistance to chassis). A diode or capacitor failure is more common and cheaper to fix than a magnetron.
Frequently Asked Questions
Is it safe to test or replace the magnetron myself?
Only if you have training and the correct tools. The microwave’s high-voltage capacitor can hold a lethal charge after unplugging; you must discharge it safely before touching components. If you are not experienced with high-voltage appliances, hire a qualified technician. If you proceed, always unplug, discharge the capacitor with an insulated tool, and follow service manual procedures and safety gear.
How much does it cost to fix a microwave that won’t heat?
Cost depends on the failed part: a high-voltage diode or capacitor typically runs $10–$60; a magnetron is usually $60–$200; a transformer is often $80–$200. Labor (if you hire a technician) can add $100–$250. If repair cost approaches or exceeds half the price of a new unit, replacement may be more economical.
Real DIY Repair Stories
Be the first to share your repair story!
Share Your Repair Story
Your experience helps other homeowners fix their appliances. Tell us how it went!
Can't Fix It Yourself? Find a Local Technician
It's perfectly okay to call a professional. Some repairs require specialized tools, deep teardowns, or dealing with complex systems that are better left to the pros.
Find the Right Part for Your Appliance
Don't guess — search your exact appliance model number at PartsDiscount.com to find the correct OEM compatible replacement part. They offer fast free shipping, guaranteed fit, and thousands of parts in stock.
Your Free Parts Videos
Whether your dishwasher won't drain, your dryer stopped heating, or your fridge isn't cold, we've created simple repair guides for the most common appliance problems homeowners face. Each guide explains what's going wrong, the most likely causes, and which replacement parts fix the issue. When you're ready to order, we link directly to PartsDiscount.com where you can search by model number and get the right part shipped fast.