796-80272900 — What This Part Is and How to Identify & Replace It

Understanding the Problem

Brief explanation: I couldn't positively identify 796-80272900 to a specific appliance or OEM from this number alone. Part numbers sometimes differ by brand, region, or catalog. Below are practical, step-by-step diagnostics you can use to identify the part, confirm whether it’s the cause of your problem, and how to replace it safely. Step-by-step identification and diagnostic steps: 1) Locate the appliance model number: find the appliance's model and serial tag (commonly on the door frame, behind a kickplate, or on the back). Record brand, model and serial exactly. 2) Photograph the part and tag: take clear photos of the part in place, any stamped numbers/letters on it, and the appliance model tag. Many parts have additional markings not shown in a single catalog listing. 3) Check the parts diagram: go to the manufacturer’s parts lookup (brand + "parts diagram" + model #) or a parts site (RepairClinic, PartSelect, AppliancePartsPros). Search the model to find the exact part and OEM part number. 4) Cross-reference the number: plug “796-80272900” into those parts sites and Google with the appliance brand; if no results, try variations (remove hyphens, add leading zeros). If still no match, contact manufacturer support with your model and the photos. 5) Inspect the part for visible failure: look for burn marks, cracking, broken assembly, separated wiring, corrosion, or melted plastic. Photograph damage for vendor help. 6) Perform simple electrical tests (if safe and applicable): with power off and the part disconnected, check continuity with a multimeter. For heating elements and igniters check resistance; for motors and solenoids check for continuity and compare to expected ranges from the parts diagram or service manual. 7) Confirm symptoms align with the part: cross-check common failure symptoms (see “commonSymptoms” below) with what your appliance is doing and any fault/error codes displayed. 8) Order the correct replacement: once you have the OEM part number from the parts diagram or manufacturer, order the exact match. Avoid guessing — look-alike parts can cause bigger problems. 9) Replace the part (general how-to): a) Safety first — disconnect power (unplug or switch off breaker); for gas appliances also shut off the gas supply. b) Remove access panels as required (keep screws organized). c) Photograph wiring before disconnecting so you can reconnect exactly. d) Disconnect connectors and mounting hardware; remove the old part. e) Install the new part in reverse order, secure mounting, reconnect wiring using your photos as reference. f) Restore power and test appliance through a full cycle; watch for proper operation and any error codes. 10) If problems persist: re-check wiring, ensure firmware/control board isn’t faulting, and consult manufacturer technical support or a qualified technician. Safety note: If the part is in a gas appliance, involves live mains wiring, or you’re unsure about testing live circuits, stop and call a qualified appliance technician. Working with gas and mains electricity can cause injury or death if handled incorrectly.

Common Symptoms

Symptoms depend on the actual part but common signs include: appliance not powering on, failure to heat, unusual noises, leaks, door latch not working, error codes, or parts visibly burned/damaged.

Common Causes

• Part number mismatch or regional variant — the wrong part ordered
• Wear and tear or mechanical failure (broken gears, cracked plastic, worn brushes)
• Electrical failure from heat, surge, or corrosion (burnt connectors, open windings)

Popular Parts That Fix This Problem

These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at ProsourceParts.com — just search by your appliance model number for a guaranteed fit.

Frequently Asked Questions