Kenmore Part 66575849001 — How to Identify What It Is and Replace It

Understanding the Problem

I couldn't find a definitive cross-reference for part number 66575849001 in public OEM databases. That happens sometimes with manufacturer or distributor numbering. The steps below show how to identify what the number refers to on your specific Kenmore appliance, check whether it's the failed item, and perform a safe replacement. 1) Locate your appliance model and serial number: find the model tag (usually on the door frame, behind the refrigerator crisper, on the back, or on the washer/dryer cabinet). Record model and serial — you’ll need them to confirm parts. 2) Cross-reference the part number with official diagrams: use the appliance model number on parts sites (SearsPartsDirect, PartSelect, RepairClinic, AppliancePartsPros). Enter your model and look through the exploded parts diagram for the part number 66575849001 or for parts that visually match the component you have. 3) Confirm visually: remove any access panels (see safety steps below), take a clear photo of the part in place, and compare it to the images from the parts website. Many suppliers list both OEM and aftermarket cross-reference numbers. 4) Check for failure symptoms: inspect the part for cracks, burns, corrosion, broken connectors, frayed wires, melted plastic, or contamination. For electrical parts, check for continuity with a multimeter. For mechanical parts, check movement, wear, and play. 5) Order the correct replacement: when you’ve confirmed the part is 66575849001 (or a cross-referenced equivalent), order from a reputable supplier using your appliance model to ensure fit. Keep the original packaging and receipt in case of returns. 6) Basic replacement procedure (generic, since exact part unknown): a) Safety first — unplug the appliance or turn off the circuit breaker; if gas appliance, turn gas off and disconnect per local codes. b) Turn off water (for washers/dishwashers) and disconnect hoses if applicable. c) Remove panels/doors to access the part — keep screws and small parts organized. d) Photograph wiring and connections before you unplug anything. Label connectors with tape if needed. e) Remove mounting screws/clips holding the part. Carefully disconnect wiring harnesses and any linked mechanical parts. f) Install the new part in the reverse order: secure mountings, reconnect wiring exactly as before, replace panels. g) Restore power/water/gas and run a test cycle to verify correct operation. Watch for leaks, noise, error codes, or abnormal operation. 7) If the appliance still shows symptoms after replacement: re-check connectors, related parts (fuses, sensors, switches, belts), and error codes. Many failures are caused by a related part (for example, a failed control board can damage sensors). Safety note: Always disconnect power and, for gas appliances, shut off the gas before opening any panels. If you are unsure about working with gas, high voltage, or internal controls, hire a qualified appliance technician.

Common Symptoms

Because 66575849001 could correspond to different components depending on the Kenmore model, common symptoms include: appliance will not start, loud noise, leaks, not heating/drying, not draining or spinning, or control/display errors — symptoms vary with the actual part.

Common Causes

• Normal wear and mechanical fatigue of the part
• Electrical failure (burnt connector, shorted component)
• Physical damage from impact, foreign objects, or corrosion

Popular Parts That Fix This Problem

These are the most common replacement parts that fix this problem. When you're ready to order, click below to find the right part at ProsourceParts.com — just search by your appliance model number for a guaranteed fit.

Frequently Asked Questions